 |
| Cherry Mobile Flare X V3 |
Take note that there is a three different version of Cherry Mobile Flare X make sure to check first your right version, Check your phone model to know what version by opening your phone and remove the battery, there you can see the device model.
- Cherry Mobile Flare X (no version) - This is the first release Flare X which is the device model is X360 and the device CPU is a MT6752 Mediatek chipset also, it has also a Android 4.4 KitKat Operating System (with Lollipop Update), if this is your phone and you are planning to update in Lollipop just connect to internet and go to settings and there you can see Software Update. DO NOT try to update by flashing other Flare X firmware version.
- Cherry Mobile Flare X V2 - This is a higher specification than the previous flare x, this has Android 5.1 Lollipop and now in MT6753 with octa core processor.
- Cherry Mobile Flare X V3 - This is the last version so far for Flare X Series, this has also a Android 5.1 lollipop firmware and it has MT6735 MediaTek Chipset, different from the previous.
Download Cherry Mobile Flare X firmware (No Version)
Download Cherry Mobile Flare X V2 firmware
Firmware password: rex@greenhills#gsmsandwich10.0Thanks and credit to Rex
Download Cherry Mobile Flare X V3 firmware
Before flashing new firmware take note that all your personal data will be deleted including sms, contacts, photos that are saved in internal storage, we recommend to back up first before flashing, follow the instruction below.
How to flash Android phone using SP Flash tool
What we need?
- PC
- Firmware/ROM, SP Flashtool and MTK Drivers
- USB Cable
- Smartphone with 30 to 50 percent battery charged
Driver Installation
Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers.
Install Driver using Auto Installer Driver
Download Driver Auto Installer v1.1236.00
- After you download and extract, open the folder and you will see Install.bat
- Run and it will appear Windows Security window
- Click Install this driver software anyway
- It will appear many times and just click the same button.
Wait for CMD window to display Install complete that indicate that driver installation is successful.
Install Driver Using MediaTek USB VCOM drivers
Download MediaTek USB VCOM drivers
To manually install MediaTek USB VCOM drivers, you can follow this video:
Flashing Stock Rom in SP Flash tool
- Download Latest SP Flash tool here and extract to your desired location.
- Open the extracted file folder and run flash_tool.exe
- On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
- Follow the screenshot below in choosing android scatter file.Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
- After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
- In your phone turn off first, or remove battery (if removable) because turn off is a must.In flash tool Select Download Only Then click Download button
In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
After you see detected proceed now to step 7.
- You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.WARNING: Do not unplug or disconnect during this operation.
- And finally, it will popup a Download OK, that means the flashing new firmware is successful.
Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
NOTE: Starting up for the first time may took long.
6.1 Some phone that has a Virus infected encounter this warning;
PMT changed for the ROM; it must be downloaded. If you don't see this warning just proceed to step 7.
to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.
PMT changed for the ROM; it must be downloaded. If you don't see this warning just proceed to step 7.
to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.
Troubleshooting
FOR INVALID IMEI or Null IMEI
After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.
password pls
ReplyDelete