How To Flash Spreadtrum 8810/6820 Devices Using Miracle Box

This is a tutorial on how to flash Spreadtrum (8810/6820) both Android & Non Android Devices Using Miracle Box

Note.

if device hangs on boot or does no boot completely

do not write flash (firmware)

{Using Miracle Box} Click on SPD, select device chip (8810/6820), tick Format, Click on Start button and connect device.

Requirements:

1. Download Miracle Box Setup here
2. Download Miracle Box Crack here (Alternative If you don't have a miracle box)
3. Download Miracle Box Drivers v1.00 here

Tools & Drivers updates here

STEPS >>

• Download Miracle Box (Either Box Setup or Cracked Version from the above links)
• Extract & Install
• Launch
• Click on SPD
• Select Write
• Select this Chip from Choose type option SPD8810/6820
• Click on the folder icon to select firmware
• Locate & select the appropriate firmware fro that particular device you are about to flash because flashing a wrong preloader, will make the device completely dead 
  (can't power on, can't charge and will not be detected by a computer)
  

• Select USB Cable When using USB Cable)
• Select Scan Def (When using Pinout)
• Click on Start Button
• Connect device >> holding volume + and volume - button of your device at the same time or holding power button only
• Patiently wait for device to be recognize
  
• Once device hs been recognized, Flashing begins (Erasing Flash...)
• Patiently wait for the process to be completed ( >> Write Completed)
• Disconnect device and Power on
• DONE!

Follow the Screenshots or read the tutorials above

WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.